Bumper- Rear

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• 11-Gauge US Steel Construction
• Retain OEM Receiver Hitch And Wiring
• Pre-Cut Openings To Utilize Factory Sensors
• 100 Pct. Made In The USA

See All

• Aluminum Rear Bumper

See All

• Ambush Series Rear Bumper

See All

• Smitty Bilt Apollo JL/JT Rear Bumper

See All

• Stand Up To 408 Hour Salt Spray Testing /Excellent UV Protection
• Dual Light Ports To Mount Auxiliary Flood Or Spot Sights
• Lights Sold Separately
• Bumper Sensor Compatible
• Durable Black Textured Powder Coat Over 11 Gauge Steel
• Bumper Accommodates Oversize Tires
• Easy To Install Pre Drilled Bolt Holes And Cutouts

See All

• Frame Cap Style Bumper
• Provide The Best Obstacle Clearance And Departure Angle
• Grade-8 Hardware For Easy Installation

See All

• The Best Ground Clearance And Departure Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Installation Requires Cutting / Trimming
• A Laser-Cut Steel Template Is Provided
• Includes High Clearance Recovery Shackle Tabs

See All

• Integrates The Existing Receiver Hitch
• Back Up Lights
• Back Up Sensor Holes
• Retains Receiver Hitch And Wiring Locations
• Pipe And Formed Treadplate
• Gloss Black Powder Coat

See All

• Combination Pipe And Tread Plate Construction
• Gloss Black Powder Coat
• Back Up Lights Included
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• Blind Spot Mounts
• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights

See All

• Provides The Highest Ground And Tire Clearance Possible
• Protects The Flares From Trail Hazards
• Full Width
• Integrated Hitch Receiver
• Recovery Shackle Tabs

See All

• Frame Mounted For Strength Without Stress To Body/Bumper
• Single-Action Opens And Closes w/Jeeps Tailgate
• Compatible w/Crawler™ And Bruiser™ Series Rear Bumpers
• Concealed Heavy Duty Pivot w/Tapered Roller Bearings
• SpyderShell™ Armor Coat Finish w/5-Year Warranty

See All

• Dual Stage Textured Black Powder Coated Finish
• Constructed From Thick 3/16 in. Cold Rolled Steel
• Raised Corners For Better Approach And Exit Angle
• Solid D-Ring And Jack Point Mount - Welded On The Inside And Out
• Aux Back Up Lights Included
• Tire Carrier Can Be Added In Future CSI Model PN[675102]
• Class Iii Hitch For True Towing
• Anti-Rattle Provision Provided For Receiver Hitch
• Bumper Bolts Directly To Your Vehicle

See All

• Stainless Steel
• Weather Resistant
• Pair
• Hardware Included
• Limited 5 Year Warranty

See All

• Black
• OE Style
• Direct Fit
• Limited 5 Year Warranty

See All

• High Clearance Design Tucks Up Tight To Provide Extreme Approach Angle And Clearance On Tight Trails
• Wraps Around To Protect Corners Of The Jeep Body
• Faceted Ends For High Clearance At The Corners Of The Jeep
• 4 mm Thick Steel Plate Construction CNC Laser Cut And Precision Brake-Formed
• Multi-Stage Fine-Texture Black Powder Coat Finish For Long Lasting Great Looks And Corrosion Resistance
• Backed By Paramounts Lifetime Structural Warranty And 5-Year Finish Warranty

See All

• 10-Stage Variable Valving
• High Pressure Nitrogen Charged
• Protects Vehicle From On And Off-Road Debris
• D-rings Included - 4.75 Ton Capacity
• D-Ring Mounts Welded Inside And Out For Increased Strength
• Black Finish

See All

• Manufactured From Durable 5/32 Steel
• Protects Vehicle From On And Off-Road Debris
• High Strength D-Ring Mounts Welded Both Inside And Out
• D-Rings Included - 4.75 Ton Capacity
• Includes 2 Receiver
• Comes In Satin Black Finish Black Finish

See All

• Classic Rock Crawling Rear Bumper

See All

• Compatible w/Poison Spyder Frame Mounted Tire Carrier
• Large Radius Bends And Die-Formed Features
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat Semi-Gloss Black Finish
• Recessed Mounts For LED Backup Lights
• 5 Year Warranty

See All

• 100 Percent Made In Texas USA
• Standard Premium 5-Stage Satin Black Powder-Coat Finish
• Has Recessed Light Pods For 2X Rigid SRM Backup Lights
• Has Recessed Light Pods For QuakeLED QQU451
• Special Order Options Include Tire Carrier /Corner Guard Upgrades

See All

• Tubular w/Sheet Metal Design
• Keeps Bumper Weight To a Minimum
• Provides Superior Strength Over OEM Rear Bumper
• Tall Corners Keep The Lines Of The Vehicle

See All

• Built In Step Pockets For Easy Bed Access
• OE Sensor Compatible

See All

• Flat Black Powder Coat
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Bumper Meets Rear Flares To Create Convenient Step
• Available With Or Without A Tire Carrier
• Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
• Rear Parking Blind Spot Sensor Compatible
• Maintains Factory Receiver
• Provision To Relocate Backup Camera
• Made In The USA

See All

• Paintable
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Engineered And Built To Be More Durable And Easier To Use
• Made From 1/8 And 3/16 Inch Steel
• Corrosion Resistant Black Powder Coating
• Raised Corners For Increased Departure Angles
• Welded Eyelets For D Rings To Increase Recovery Options
• Will Work With Factory Receiver Hitch
• Can Accommodate Up To 40 Inch Spare Tire

See All

• Rear Bumper

See All

• Integrated Steps On Either Side Of The Tailgate
• Durable Formed 3/16in. Steel Construction
• Retain OEM Receiver Hitch And Wiring Locations
• 3/4in. D-Ring Recovery Points
• 2 Stage Black Powder Coat

See All

• Satin Black Finish
• Massive Recovery Hooks
• Built-In Jack Lifting Points
• Limited 5 Year Warranty

See All

• Easy To Install!
• Durable; Steel Construction
• Incl. [2] Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Incl. Backup Sensor Relocators

See All

• Manufactured From Durable 5/32 Steel
• Protects Vehicle From On And Off-Road Debris
• High Strength D-Ring Mounts Welded Both Inside And Out
• D-Rings Included - 4.75 Ton Capacity
• Includes 2 Receiver
• Comes In Satin Black Finish Black Finish

See All

• Modular Rear Bumper Specifically Designed
• Heavy-Duty Tire Carrier And Departure Roller Kit
• With Optional Accessories Like End Caps
• Modular Design Lets You Build Up The Rear Bumper As Desired
• High-Access Profile Allows More Clearance Over Rocks
• 3/16 in. Thick Steel To Withstand Tough Off-Road Trails
• Bolt-On Installation To Factory Bumper Mounting Locations
• No Drilling Required
• Incl. Fully-Welded D-Ring Shackle Mounts w/1 in. Inside Diameter
• Tough As Nails - Tested For Durability And Strength
• Accessories Not Included

See All

• 3/16 in. Laser Cut Steel w/E-Coat And Wrinkle Finish Powder-Coat
• Warning Do Not Exceed Towing Capacity
• Includes A Class 2.5 Receiver Hitch
• No-Drill Application
• w/Bolt-On Convenience To Factory Mounting Points
• D-Rings Sold Separately
• D-Ring Mounting Bosses Welded Both Front And Back For Strength
• 2 in. Hitch Mount Accessories
• Approach/Departure Roller Mounts Not Included

See All

• 3/16 in. Internal Structure Plating
• 1/8 in. External Steel Plating
• Reinforced Clevis Mounts
• Dimple Died Step Plates

See All

• Identity Jeep Rear Bumper

See All

• iDentity Bumper Components

See All

• Truly Modular Design For Customization
• Optional Shackle Or Non-Shackle Mount End Pods Available
• Avail. Mesh And Trim Ring Inserts w/Integrated Parking Sensors
• Integrated 8 in. Accent Led Lighting w/Preparatory Control Module
• Accommodates w/Factory Hitch And Tow Point
• Allows For Multitude Of Rear Facing Light Options
• Constructed From High Quality Steel
• Made In USA

See All

• Identity Rear Bumper Shackle End Pods

See All

• 10-Stage Variable Valving
• Durable Steel Construction
• Includes 2 Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Includes Backup Sensor Relocators

See All

• Provides A Stable Platform While Providing Max Towing Capacity
• Black Powdercoat Finish For Superior Corrosion Resistance
• Options Are Bolt On Receiver And Black Matte Finish
• Proudly Made In The USA

See All

• Direct Fit
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty

See All

• M1A2 Modular Rear Bumper For 14-18 Chevy Silverado

See All

• Form Fitted And Lightweight Design With A Modern - Futuristic Style
• 7-Gauge Smooth Steel With 12-Gauge Inserts / 1/4 in. Brackets And 3/4 in. Shackles
• Corrosion-Resistant / 3/5mm Thick - Carbide Black Powder Coat Finish
• Lightweight Yet Tough With Improved Strength Through Design And Fabrication
• Angled Wings For Increased Ground Clearance
• Perforated 12-Gauge Inserts Provide Protection To LED Lights
• Incorporates Spare Tire Lock Cover
• Enables Convenient Access To Factory Receiver Hitch
• Allows Re-Use Of OEM Trailer Plug Adapter

See All

• OEM Style Steel Rear Bumper

See All

• License Plate Mount With Led Light Included
• D-Rings Included
• Improved Clearance For Off Road
• Led Lights Included
• Direct Bolt-On
• Fully Welded Design
• Black Powder Coat Finish
• Install Kit Included
• Ready For Winch Mounting
• Dimensions- 66 in. L X 9 in. W X 8 in. H
• Warrantied Free from Defects in Material/Workmanship for 1 Year

See All

• Hammer Black Powder Coat Finish
• 10 In. Single Row Light Bar Mounts
• Parking Sensor Cutouts

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Backup Sensor Cutouts
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Rear Bumper

See All

• Mounting Brackets Will Vary With Make/Model

See All

• Brushed Aluminum Skid Plate Included- Works with Factory Hitch
• Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
• Pre-Runner Style
• 5 year Finish Warranty- Lifetime Workmanship Warranty

See All

• 3/16 Inch Steel Plate Construction
• Bolt On Installation Includes Hardware
• Dual Shackle Plates For D-Rings Tie To Frame Rails
• License Plate Pocket Reuse OEM Lights
• Dual Process Black Powder Coat Finish
• Retain OEM Tow Hitch
• Can Mount TN-5293 Swing Arm Tire Carrier

See All

• 3/16 in. Cold Rolled Steel Plate Construction
• Dual Shackle Plates Tie To Frame Brackets
• Will Allow For TC 5293 Swing Arm
• Stronger Then OEM Bumper
• Dual Process Black Powder Coat Finish
• Easy At Home Installation With Only Hand Tools
• Return OEM Tow Hitch

See All

• Aggressive Styling
• Integrated Tow Hooks And D-Ring Mounts
• Double Rung Side Step
• Fab Fours Signature Knife Edge Design
• Ease Of Installation
• Includes 16 Gauge Removable Skin
• Sensor Compatible
• 2 Integrated Pod Mounts For Reverse Lights
• Stainless Steel Hardware
• 2 Stage Matte Black Powder Coat
• 11 Gauge Steel Construction
• MADE IN THE USA

See All

• Manufactured From Durable 5/32 Steel

See All

• Direct Fit
• Dual Gloss Black Powdercoat Painted Finish
• Dense Zinc Treated Undercoating
• Expertly Robotically Welded
• Bumper Bolts Directly On To Vehicle
• 2 in. Receiver Hitch
• 5 Year Limited Warranty

See All

• OE Style
• Direct Fit
• Limited 5 Year Warranty

See All

• 3/16 in. Steel Plate
• Bumper Step For JT-2965
• Bolt-On Design
• Uses Factory Frame Mounting Holes For Extra Support
• Optional Bed Protector JT-5101
• Two-Stage Light Texture Finish In Black
• 3 Year Finish/Limited Lifetime Warranty

See All

• Rear Bumper Step Pad

See All

• Robotically Welded To Exacting Specifications
• Black Dual Powdercoat with Zinc Undercoat
• Welded One Piece Design
• Attached to Factory Mount Points
• Extremely Durable

See All

• Manufactured From Durable 5/32 Steel
• Protects Vehicle From On And Off-Road Debris
• High Strength D-Ring Mounts Welded Both Inside And Out
• D-Rings Included - 4.75 Ton Capacity
• Includes 2 Receiver
• Comes In Satin Black Finish Black Finish

See All

• Easy Bolt-on Installation.
• Aggressive Appearance.
• Incl. [2] Rough Country Led Cubes
• Incl. D-rings
• Retains Factory Receiver Hitch

See All

• Tire Carrier Takes Load Off Tailgate
• Fully Adjustable
• Semi Gloss Black Powder Coat Finish
• Secures With Heavy Duty Latch
• Custom Welded Shackle Mounts
• 1 in. D Rings Included

See All

• Rear Steel Bumper

See All

• Gloss Black
• Allows Oversized Spare Tire
• Welded End Caps
• Limited 5 Year Warranty

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• With Receiver
• No D-Ring Mounts

See All

• Tough And Durable
• Ends Are Tapered For Increased Departure Angles
• Integrated 2 in. Receiver

See All

• Manufactured From Durable 5/32 Steel And 2x.120 Tubing
• Protects Vehicle From On And Off-Road Debris
• Incl. D-Ring Set
• Satin Black Finish
• Installation Hardware Included

See All

• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

See All

• Maximize Performance On The Toughest Trails
• Multi-Faceted Bumper Design
• Plate Steel Bumper Construction
• Recessed Back-Up Lamps
• Integrated Hitch Receiver
• Rock Solid Mounting
• Recovery Shackle Tabs

See All

• Multi-Faceted Design
• Recessed Back-Up Lamps
• Works w/Existing Equipment
• Rock Solid Mounting

See All

• Black
• Tube style
• Raised Ends For Better Ground Clearance
• Built in Hitch For Accessories; Not Designed for Towing
• Limited 5 Year Warranty

See All

• Black
• Stamped Steel
• Fits Up To 7/8 in. D-Rings; Not Included
• Efficient Stamping Process Used
• Creates A Product Lighter Than Most Aftermarket Steel Bumpers
• Sturdy 11 Gauge Powder Coated Steel Construction

See All

• 11-Gauge Main Body
• 7-Gauge Bracketry
• Louvered Recesses For Reduced Drag
• Sensor Compatible
• Direct Bolt On Application
• Block Off Plate w/Stainless Hardware For No Lighting Option
• High Clearance Bumper
• Formed To Fit The Contours Of Vehicle
• CNC Laser Cut
• Made In America

See All

• Spartan Rear Bumper

See All

• 1 Piece
• Body Width Profile

See All

• Durable Black Powdercoated
• Made From Formed Channel
• Diamond Plated Step Plates And Skirts
• Comes Standard With Backup/Work Lights
• Factory Receiver Must Be Retained
• Black Matte Finish Is An Option
• Proudly Made In The USA

See All

• Raised corners for better entry and exit under the most extreme conditions
• Accommodates 3X3 Cube Led Lights
• Integrated 3/4 in. D-Ring Mounts
• Class Iii Receiver Hitch
• Integrated Jack Points
• Perfect Mid Width Design

See All

• Direct Fit
• E-Coat Undercoated With Dual Stage Textured Black Powder Coat
• Heavy-Duty 1/4 in. Steel Plate Design
• Three Point Mounting System Supports Over-Sized Tires
• Special Lock Design Keeps Tire Carrier Secure While Off-Roading
• 5 Year Limited Warranty

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Direct Fit
• Black Powder Coat
• Dense Zinc Treated Undercoating
• Two Stage Textured Black Powder Coat Finish
• Expertly Robotically Welded
• Bumpers Bolt Directly To Your Vehicle
• Bumper Is 2 in.X.120 in. Wall
• 2 in. Receiver Rated Class III 9;000 LBS.

See All

• Standard Rear Bumper

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat finish With Satin Black Panels
• Mounts For Cube Lights

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights
• Retains OEM Parking Sensors
• Retains OEM Tow Hitch And Trailer Plug
• Retains OEM Blind Spot Modules

See All

• Made In Texas USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount Fits WARN M8000 Or 9.5XP
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• Manufactured From 5/32 in. Steel
• Protects Vehicle From On And Off-Road Debris
• High Strength D-Ring Mounts Welded Both Inside And Out
• D-Rings Included - 4.75 Ton Capacity
• Built In Winch Plate Will Mount Up To 12000Lbs Winch
• Comes In Satin Black Finish Black Finish

See All

• Safely Holds Up To 37 In. Tires
• Innovative Swing-Out System
• Includes 3rd Brake Light Relocation Bracket
• Includes License Plate Relocation Bracket
• Durable Steel Construction

See All

• Includes 2 in. Receiver Tow Hitch Made Of 1/4 in. Steel Reinforced With 7/16 in. Right
• 3rd Brake Light Bracket Included
• Steel Welded Accessory Panel Allows For Mounting A Hi-Lift Jack Or Gas Can

See All

• Backed By A Five Year Limited Warranty

See All

• Made In American And Texas Strong USA
• Schedule 40 Pipe For Center Structure
• 11 Gauge Shell w/1/4 in. Heavy Duty Mounting System
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Recessed Light Ports For Flush Or Surface Mount Led Cubes
• Mounting Holes For License Plate
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Superior Strength And Styling
• Give Your Vehicle That Extra Cool Factor
• Two Front Side Openings Allow Light Options
• Sensor Compatible
• 11 Gauge US Steel

See All

• .120 in. Wall Steel Tube Construction
• Laser Cut Skid Plates/Tabs And Plates
• Direct Fit/No Cutting Or Welding Required
• Stainless Steel Hardware
• Designed To Work With Factory Tow Equipment

See All

• Fits up to 37 in. tires
• Class III tow rated
• New cam-style pin adjustment
• Easy 2 finger opening latch
• Double catch latch eliminates accidental opening
• MOLLE Pals compatible to allow multiple pouch mounting configurations
• Stainless steel pivot washer for longer wear life
• 3rd brake light bracket included
• integrated gas can and jack mounts

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-stage textured matte black finish

See All

• 18-Current Wrangler JL; 2-4 Door
• Adjustable Slant Tire Carrier
• Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
• Included Adjustable 3rd Brake Light Bracket
• Retains OE Camera Location And Functionality
• Removable Trail Jack And Aerial Antenna Mount
• Steel Vent Cover
• Roller Bearing Pivot
• Fits Up To 40 in. Tire; With Single-Action Open And Close Feature

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All

• Textured Black
• Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
• Incl. Standard Bumper Ends
• Modular Design
• Steel

See All

• Textured Black
• Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
• Incl. Standard Bumper Ends
• Modular Design
• Steel

See All